|
|
|
Our new NetPod data loggers are the latest in high speed data loggers
that feature not only full time synchronisation of data from all input channels, but also synchronisation across all
loggers connected within a network. All loggers can be connected via Ethernet allowing individual loggers to be situated close
to instruments. These units are suitable for static and dynamic monitoring, particularly for large structures in Structural
Health Monitoring studies.
NetPod 4003
Our NetPod 4003 is a 24 bit data logger with sample rates up to 2000
Hz. The logger is available with a wide range of 4 channel input modules allowing 16 input channels
per logger unit. Each input channel carries its own 24 bit analogue to digital converter, ensuring that all channels are fully
synchronised, signal conditoning and anti-alias filters.
All signal pass to the main processor of the logger via Opto isolated devices.
Each NetPod 4003 may be further connected via an Ethernet network which is, again, fully synchronised.
24 bit, 2000 Hz sampling.
Fully synchronised, Internal and Network.
Mains or 12 V DC power.
Modular "hot swap" 4 channel input boards.
In-built over voltage protection.
Digital anti-alias filters.
ADC on each input channel.
All signal pass to the main processor of the logger via Opto isolated devices.
Each NetPod 4003 may be further connected via an Ethernet network which is, again, fully synchronised.
24 bit, 2000 Hz sampling.
Fully synchronised, Internal and Network.
Mains or 12 V DC power.
Modular "hot swap" 4 channel input boards.
In-built over voltage protection.
Digital anti-alias filters.
ADC on each input channel.
 |
| NetPod 4003 16 channel |
NetPod 4004
Our NetPod 4004 is a 16 bit data logger with sample rates up to
20 kHz. The logger is available with a wide range of 4 channel input modules allowing 16 input channels
per logger unit. Each input channel carries its own 16 bit analogue to digital converter, ensuring that all channels
are fully synchronised, signal conditoning and anti-alias filters.
All signal pass to the main processor of the logger via Opto isolated devices.
Each NetPod 4004 may be further connected via an Ethernet network which is, again, fully synchronised.
16 bit, 20 kHz sampling.
Fully synchronised, Internal and Network.
Mains or 12 V DC power.
Modular "hot swap" 4 channel input boards.
In-built over voltage protection.
Digital anti-alias filters.
ADC on each input channel.
All signal pass to the main processor of the logger via Opto isolated devices.
Each NetPod 4004 may be further connected via an Ethernet network which is, again, fully synchronised.
16 bit, 20 kHz sampling.
Fully synchronised, Internal and Network.
Mains or 12 V DC power.
Modular "hot swap" 4 channel input boards.
In-built over voltage protection.
Digital anti-alias filters.
ADC on each input channel.
|
|